Temperature Transmitter ATS-TT 1000


INTRODUCTION
The Temperature transmitter (ATS-TT 1000) is designed and produced by AT Systems. Temperature transmitter is used in various industrial and commercial application where accuracy and repeatability is required. ATS-TT 1000 temperature transmitter is fabricated with high-quality stainless steel and has an anticlogging design which requires less maintenance while in operation.

Easy operation and sleek design is handy for confine placement.

APPLICATION
• CHEMICAL INDUSTRY
• PETROCHEMICAL INDUSTRY
• PLANT AND VESSEL
• GAS COMPRESSORS
• WATER TANKS
• AIR COMPRESSORS
• HEAT EXCHANGER
• BOILER FEED WATER
• REVERSE OSMOSIS






























×

Specifications Descriptions
Measuring Range -100⁰C ῀ 100⁰C
-50⁰C ῀ 50⁰C
-50⁰C ῀ 100⁰C
0⁰C ῀ 50⁰C
0⁰C ῀ 100⁰C
0⁰C ῀ 200⁰C
Note: (Temperature Ranges will be can be changed upon the user’s request. Maximum temperature and minimum temperature are 200⁰C and -100⁰C respectively)
Accuracy ±0.5% High accuracy model with 3-Wire Temperature sensor connection
±1.0% Low accuracy model with 2-Wire Temperature sensor connection
Analog output 4 – 20mA corresponding to Temperature, +/- 0.01mA accuracy,0.01mA resolution, maximum resistive load of 500Ω
Mechanical Connection Standard ¼ in Male BSPP connection User can require up to ½ inch of BSPP,NPS,BSPT and NPT connection
Requires 24mm spanner size for mechanical installation (Please refer to user manual for further information)
Pressure Rating Maximum working pressure limit is 20 BAR
Insertion Length 10mm Single body Non-Welded insertion length for long lasting performance
Customized insertion length will be provided upon the user’s request
“Please refer to insertion lengths in model and price selection guide”
Power Requirement +12 to 24 VDC (Maximum up to 40 VDC) without Polarity Protection
+12 to 24 VDC (Maximum 40 VDC) Connection Shielded 2 conductor wire is also available upon user request
Other Output Option The temperature transmitter can be configured with the following output • 1-5 Voltage Output • Rs-485 Communication
Material Construction Available in SS304 or SS316 User must mention the required material of construction before ordering
Standard Model No (Typical standard model number). Please obtain standard model and general price list from Sales Representative
Cable Length Standard 5-meter wire is provided with the transmitter. User can request for more length
Electrical Connection IP-68 Gland Connection
Weight SS316≈155 grams Approx.

×

Downloads


Related Products

©  2021. RCB Chemicals & Services. All rights reserved.

info@rcbchemicals.com

Mountains Mountains