pH Controller ATS-X1000-AW1


INTRODUCTION
ATS-X1000-AWI is an ARM processor based industrial controller used to analyze pH and control pH parameter in various water applications. It provides set point values for high and low signal. The controller comes with three point Auto and Manual calibration feature which comes in handy in field application.

Simple to control through its 6-button control panel. The backlit LCD contrast and brightness can be adjusted to user requirement. Provide logging function can save parameters values with respect to time. Password protection feature is added for settings and process safety

APPLICATIONS
• REVERSE OSMOSIS
• BOILER WATER
• COOLING WATER
• CLOSED LOOP SYSTEM
• DRINKING WATER
• TEXTILES CHEMICALS
• WASTE-WATER















×

Description

×
Specifications Descriptions
Measuring Range (pH) 0.00 – 14.00 scale, 0.001pH resolution, +/- 0.001 accuracy, +/- 1 digit
Measuring Range (Temperature) 0.0-200.0 °C, 0.1 °C resolution, +/- 1.0 °C accuracy 0.0 – 200.0 °C, 0.1 °C resolution, Linear Coefficient +/- 1.0 °C accuracy (PT 1000)
Clock Internal Clock, 24 Hr format, +/- 1 min / month accuracy
SD Card (Optional) Can Save multiple values in SD Card, user can save values for up to 5 years with Data Read, Data Rate, Format Value
Calibration Mode Up to 3 points with any NIST standard and TCT standard buffers
Analog Output 1 4 – 20mA corresponding to conductivity, +/- 0.001mA accuracy, 0.001mA resolution, maximum load 500Ω
Analog Output 2* 4 – 20 mA corresponding to temperature, +/- 0.001mA accuracy, 0.001mA resolution, maximum load 500Ω
Relays 1 (HI) – 250 VAC, 0.5A – On/Off Programmable
2 (LO) – 250 VAC, 0.5A – On/Off Programmable
Relay function with Dead Band
Display Large Graphical LCD (128 × 64) with adjustable contrast and adjustable brightness
Dimensions (Volume Based) L × W × D (113.5mm × 113.5mm × 83mm)
Panel Cutout Size L × W (93mm × 93mm)
Temperature Compensation* Linear Temperature Compensation through-out the sensor range
2 – wire & 3 – wire Pt1000 RTD auto/ manual
Power Requirement +16 – 24 VDC (Maximum up to 35 VDC)
Weight (Assembly) Approximately ~ 255 Grams
Modbus RTU / Wi-Fi (Optional) Modbus RTU and Wi-Fi communication with any device and connect multiple devices with device ID and parity settings (AT system Software will be required)
IP Class Protection IP 65 (In Panel Mount Installation)

×

Downloads


Compatible Products


Related Products

©  2021. RCB Chemicals & Services. All rights reserved.

info@rcbchemicals.com

Mountains Mountains