Flow Transmitter FT-1000


INTRODUCTION
FT-1000 is an industrial standard inline flow transmitter. The FT-1000 works on the differential pressure technology, where a positive differential pressure (ΔP) is directly proportional to an average flow velocity. The FT-1000 is built with nozzle based differential pressure technology with much better discharge coefficient (𝐶𝑛) which decreases the head loss while measuring flow with precision. No moving parts, make the FT-1000 durable in flow measuring application. Sandwich type FT-1000 is easier to install in various flange standards such as ASME & DIN. With a maximum flow turndown ratio of 15:1. FT-1000 is economical and perfect for continuous flow process.

APPLICATION
• Water Filtration
• Water Management
• Reverse Osmosis
• Ultra-Filtration
• Tube Wells
• Chemical Processes
• Food Industries
• Water Softeners
• Power plants
• Cooling Towers






























×

Model Range FT-1000-H FT-1000-L
Sensing Technology ΔP ±0.15% Accuracy 0kPa to 70kPa Measuring range ΔP ±0.50% Accuracy 0kPa to 70kPa Measuring rang
Accuracy (Flow) ±0.80 % Full Span
±0.10 % Linearity
±0.10 % Hysteresis
±0.10 % Repeatability
±1.15 % Full Span
±0.50 % Linearity
±0.25 % Hysteresis
±0.25 % Repeatability
Process Connection ASME B16.5 (Inches):
1.5”, 2”, 3”, 4”, 6”, 8”, 10”, 12”
DIN Flange (mm):
40, 50, 65, 80, 100, 125, 150, 200, 250, 300
ASME B16.5 (Inches):
2”, 3”, 4”, 6”, 8”, 10”, 12”
DIN Flange (mm):
40, 50, 65, 80, 100, 125, 150, 200, 250, 300
β (Beta Ratio) 0.75 (D2/D1) 0.60 (D2/D1)
Static Pressure (Inline Pressure) Max 20 BAR 300 PSI Max 20 BAR 300 PS
Specifications Descriptions
Controller Compatibility FT-1000 is only compatible to KE-FL 2000* Flow controller
Note*: Please check documentation on KE-FL 2000 Flow controller
Analog Output 4-20mA corresponding to Pressure, +/- 0.01mA accuracy, 0.01mA resolution, maximum load 500Ω
Calibration Mode Flow Transmitter comes factory calibrated Two Potentiometers are provided to adjust pressure span and offset with corresponding analog values
Material of Construction SS316L
User can require the following material on order (SS 304, SS2205)
Temperature Rating/td> -40 to +125°C User must specify fluid physical properties before ordering
Media Compatibility FT-1000 is only for Non-corrosive liquid application Liquid Compatibility to SS 316L
Power Requirement +12 - 24 VDC (Maximum up to 40 VDC) with Polarity Protection
Shielded 2 conductor wire is also available on user request
IP Class Electrical connection is through Din 43650 connector having an IP-65 rating

×

Downloads


Related Products

©  2021. RCB Chemicals & Services. All rights reserved.

info@rcbchemicals.com

Mountains Mountains