Pressure Transmitter 30S- Series (Compensated)


INTRODUCTION
The 30-S Series pressure transmitter is an advance engineered pressure transmitter produced by RCB research team. This series uses Piezo electric cell which is encapsulated in silicon oil isolating the sensor with Stainless steel diaphragm. This media isolation enhances the longevity of the transmitter while in operation.

30S-Series pressure transmitter is used in various Industrial and Commercial application where high accuracy and repeatability is required. Easy operation and sleek design is handy for confine placement. 30S-Series pressure transmitter provides both liquid (Liquid compatible to Stainless steel diaphragm) and Gas media (Gas compatible to Stainless Steel diaphragm).






×

Description


INTRODUCTION
15-S Series pressure transmitter is a robust engineering product used to measure pressures in various Industrial and Commercial application. Easy operation and sleek design is handy for confine placement.

15S-Series pressure transmitter is based on Piezo-Resistive technology where a silicone etched transducer measure pressure and provides mV to the corresponding pressure. 15S-Series pressure transmitter provides bot liquid (Non-Corrosive Liquid) and dry media(Non-Corrosive Gas).

×
Specifications Descriptions
Measuring Range (pH)
Metric Models US Customary Models
0.00 – 0.25 BAR
0.00 – 1.00 BAR
0.00 – 2.00 BAR
0.00 – 4.00 BAR
0.00 – 10.00 BAR
0.00 – 20.00 BAR
0.00 – 30.00 BAR
0.00 – 5.00 PSI
0.00 – 15.0 PSI
0.00 – 30.0 PSI
0.00 – 100.0 PSI
0.00 – 150.0 PSI
0.00 – 300.0 PSI
0.00 – 500.0 PSI
Accuracy ±0.1 % Linearity throughout the Span ±0.02 % of the Span Pressure Hysteresis ±0.02 % of the Span Repeatability
Calibration Mode Two Potentiometers are provided to adjust span and offset pressure with corresponding analog values.
Analog Output 4-20mA corresponding to Pressure, +/- 0.05mA accuracy, 0.01mA resolution, maximum load 500Ω
Temperature Full Temperature compensation throughout the Range Operating Temperature range of both liquid and gas (-40°C to +125°C)
Compatibility Liquid Compatibility (Compatible to Stainless Steel)
Dry Compatibility (Compatible to Stainless Steel)
Mounting Type Standard ¼ Inch male NPT
-Other port threads and size can be provided on user request
Electrical Connection Easily replaceable Din Valve connector
Power Requirement +12 - 24 VDC (Maximum up to 40 VDC)
IP Class Protection IP 67
Applications Water application, Gas compressors, Water tanks, Air Compressor, Heat Exchangers, Oil pumps, Residential Water pumps, Boiler water monitoring and Pneumatic Controls.

×

Downloads


Related Products

©  2018. RCB Chemicals & Services. All rights reserved.

info@rcbchemicals.com