AT Systems

Level Transmitters ATS - LT 2000


INTRODUCTION

ATS-LT 2000 Level Transmitter is an industry standard External mount transmitter based on hydro static technology. LT 2000 is fully compatible with ATS-LV 1000 Level controller. LT 2000 is fabricated with high-quality Stainless Steel and has an anticlogging design which requires less maintenance while in operation.

Transmitter can be easily installed outside the tank of any shape. ATS-LT 2000 has an IP 65 protection against the dust and fluid. LT 2000 transmitter can be used in all fluid having SS 316.

APPLICATIONS

• SILO TANKS
• UNDERGROUNDTANKS
• FUEL TANKS
• EDIBLE OIL TANKS
• DAIRY STORAGE TANKS
• OVERHEAD TANKS
• DOMESTIC TANKS

















×
Specifications Descriptions
Measuring Range
Metric Models
0.00 – 1.00 Meter
0.00 – 2.00 Meter
0.00 – 3.50 Meter
0.00 – 7.00 Meter
0.00 – 10.0 Meter
0.00 – 25.0 Meter
0.00 – 40.0 Meter
Accuracy ±0.5 % Linearity throughout the Span
±0.1 % of the Span Pressure Hysteresis
±0.1 % of the Span Repeatability
Calibration Mode Level Transmitter comes factory calibrated Two Potentiometers are provided to adjust span and offset pressure with corresponding analog values
Analog Output 4-20mA corresponding to Pressure, +/- 0.05mA accuracy, 0.01mA resolution, maximum load 500Ω
Temperature Full Temperature compensation throughout the Range Operating Temperature range of both liquid and gas (-40°C to +125°C)
Material of Construction Available in SS 316
User can require other material of construction
Power Requirement +12 to 24VDC (Maximum 40VDC) Connection Shielded 2 conductor wire is also available upon user request
IP Class Protection Ingress Protection of IP 65 against dust and water Epoxy encapsulation available on user request
Applications • Water Storage Tanks
• Chemicals Storage Tanks compatible with SS 316
• Diesel Fuel Tanks
• Gasoline Fuel Tanks
• Furnace Oil Tanks
• Cooking Oil Tanks
• Dairy Products Tanks
• Control Buffer Tanks
Mechanical Connection Standard 1/4in Male BSP connection User can require up to ½ inch of BSP or NPT connection Requires 27mm Spanner for mechanical installation (Please refer to user manual for further information) For Sanitary Connection, user must provide connection size before ordering
Weight 155 grams Approx.

×

Downloads


Compatible Products


Related Products

©  2018. RCB Chemicals & Services. All rights reserved.

info@rcbchemicals.com